Naiad Dust Control or DC product is available in 2 x 2.5 gallon containers, 30 and 55 gallon drums. Naiad DC is used to control dust. Naiad DC may be used on open dirt areas, gravel roads, agricultural areas, building sites, or any place that dust is a problem.
Naiad DC may be applied through an irrigation system, spray tank, water truck, or Venturi devices.
Naiad DC allows water to penetrate deeper and faster, minimizes water run-off, helps break up soil clods resulting in excellent compaction. Helps save water, fuel, and time by allowing fewer equipment trips across the compaction area. Is effective for long-lasting dust control. Results in real savings, due to the low usage rate, fewer passes with tamping and rolling equipment, fewer trips with the water truck, excellent dust control and less water.
Use one to four (1 - 4) quarts of Naiad DC per 1000 gallons of water or use one to four (1 - 4) Naiad DC per 1 acre of soul. Naiad DC should be added toward the end of the fill to reduce foaming a defoamer may be used. Naiad DC is a temporary control of dust and should be applied about once a week. Repeat applications as necessary.
Naiad Liquid Wetting Agent is an excellent choice for helping with erosion control areas. Naiad Wetting Agent may be applied by spray tank, injection system, or added to hydro-mulch tank.
Use Naiad Wetting Agent in newly-planted areas to help control the erosion caused by the irrigation system, on banks where runoff is a problem, or anywhere erosion is a problem.